Cleaning Carpet With Baking Soda-Car Detailing

Benefits Of Cleaning Carpet With Baking Soda

Cleaning carpets can be a daunting task. Vacuuming alone is not always enough, and hiring professionals to steam clean can be expensive. After reading this article you will be set up for success in regards to cleaning carpet with baking soda.

However, there are ways to achieve a deep cleaning without breaking the bank. Baking soda offers an inexpensive and effective alternative to traditional carpet cleaning methods. 

Photo by Mike B

Baking soda is a natural deodorizer, which means it will help neutralize unpleasant smells in carpets. It also helps break down dirt particles that have been ground in over time by acting as an exfoliant and abrasive agent.

This makes it perfect for spot cleaning if you experience any unexpected spills or stains on your carpeting.

Additionally, the powdery texture of baking soda acts as a gentle scrub that won’t damage delicate fibers or fabrics; this makes it ideal for any type of rug or carpeting material such as wool, cotton, nylon and more!

Supplies Needed To Clean Car Carpet With Baking Soda

Cleaning car carpets with baking soda is an eco-friendly and cost-effective way to keep your vehicle in top condition.

Baking soda is a natural deodorizer that can provide powerful results without any harsh chemicals or cleaners. If you’re ready to take on the task of cleaning your car carpet with baking soda, there are some supplies you’ll need for the job.

Essential supplies for cleaning carpets with baking soda include vacuum cleaner, dry towel, clean cloths, brush or scrubber, and of course baking soda itself. Vacuuming the carpets first is an important step as it removes dirt and debris before they sink deeper into the fabric.

Once this is done use a dry towel to soak up remaining moisture and then liberally sprinkle baking soda over the affected area so that it covers all visible parts of the carpeting.

Step 1: Vacuuming

Cleaning car carpet is a task that can often be a daunting and time consuming process. If you rather have a professional work on it, here is our guide covering different types of detailing.

However, with the proper steps, it doesn’t have to be so difficult!

The first step of the process should involve vacuuming the entire interior of your vehicle.

This will help remove dirt, debris and allergens from inside your car. To get the best results, use an upholstery attachment for any leather or fabric surfaces as well as crevices in between seats.

Additionally, make sure to vacuum all areas including carpets under mats and along door jams.

After completing this step, you’ll have a much cleaner surface to work with which will make further cleaning steps easier and more effective.

Step 2: Sprinkling Baking Soda

When it comes to cleaning car carpets, baking soda can be an effective tool for removing stains and unpleasant odors.

Sprinkling some baking soda on your vehicle’s carpet is the second step of the process; this simple but effective solution should always be part of a comprehensive cleaning routine. 

To begin with, you’ll need to choose a brand of baking soda that’s free from additives and fragrances.

Once purchased, start by shaking a layer over the affected area of your car’s carpet and use a brush or other object to work it into the fibers. Leave it there for several hours–overnight if possible–and then vacuum up the residue with a solid-suction vacuum cleaner.

Step 3: Scrubbing with Brush/Cloth

Step three in the process involves scrubbing the carpet with a brush cloth. This step requires some elbow grease, but it’s essential to remove stubborn dirt and stains that are stuck in the fibers. 

Begin by attaching a stiff-bristled brush to an extendable handle and then dampen the brush cloth with lukewarm water. Use a small amount of liquid dishwashing soap or shampoo on the cloth as well.

Gently scrub the stained area of your car’s carpet and be sure to pay attention to any areas that may need extra attention from dirt buildup or other stains.

Step 4: Vacuuming Again

When finished, use a vacuum cleaner to remove any remaining suds and residue from cleaning solution as well as dirt that has been loosened up by brushing.


In conclusion, baking soda is a great and affordable way to clean carpets in your car. It cleans away dirt, oil, and odors from the fibers of the carpet without damaging it.

It is an ideal choice for those who want to make sure their car looks its best while avoiding harsh chemicals and expensive products.

Furthermore, this simple method can be used on other surfaces in your car as well. With just a few simple steps you can use baking soda to keep your car carpet looking like new!

Edward Cole
Edward Cole

Hi, my name is Edward Cole and I have been in the car customization industry for a decade now. I also specialize in repairs, so I have plenty of experience with looking after my vehicle and showing it off.

When your car is in pristine condition, with a fresh wrap around it, people notice. I cannot tell you how many compliments I have received through my car and its condition. People appreciate a customized car and it will give you a great deal of satisfaction to be driving the most envied vehicle on the road.

One thing that I have found to be incredibly popular in the car customizing industry - by both owner and admirer - is color seatbelt customization. Having anything other than the plain black seat belts like every other car will get you being the talk of the town in no time.

I have created my website in the hopes of inspiring some of you to customize your own vehicle and improve your self esteem. Taking care of your car is an extension of taking care of yourself. So, take a look around and see if you find anything you fancy - you could be steps away from a fresh new look.

Articles: 143